Silicone rollers · Fuser rollers
Fuser pressure roller
Silicone on a machined core, ground to TIR ≤ 0.02 mm, TIR report with every roller.
Both buttons pre-fill this product; the difference is whether you want the catalogue part or a change.
01 — Specification
Specification
- MaterialSilicone on a machined core
- Part numbers320+ cross-referenced
- TIR≤ 0.02 mm, reported
- MOQ1 pc
- Lead timeQuoted per model
02 — What it is
About this part
The core is half the part: a bonded, ground core holds runout, a loose one shows up as banding on the page. Cores come from your drawing or from the old roller.
Send the printer model or the old roller; the cross-reference answers within 24 hours.
03 — Next step
Two routes, one form
Buy finished: ships to the specification and MOQ above. Customize: colour, marking and packaging on the same tool, or a new geometry tooled to your drawing.